Səhifə 1 dan 20 nəticələr
Chromatographic performance based on the use of a C18 reverse phase and a LC-SCX cation-exchange column associated with UV absorption at 280 nm is optimized and compared for the simultaneous determination of resveratrol and other polyphenolic compounds with the aim to establish the best experimental
OBJECTIVE
A new desorption method was investigated, which does not require toxic organic solvents. Efficient desorption of organic solvents from activated carbon was achieved with an ananionic surfactant solution, focusing on its washing and emulsion action.
METHODS
Isopropyl alcohol (IPA) and
In order to study solvent exposure in shoe factories, 43 kinds of glues and 22 solvent products used in footwear manufacturing were analyzed. A gas chromatographic spectrometric method was used to identify the mixtures of solvents contained in glues and their diluents. Acetone, ethylacetate and
A brief review of urine analysis in studies of occupational exposure to volatile organic compounds and gases is provided. Analysis of exhaled breath for volatile compounds does not have a long history in occupational medicine. A number of studies has been undertaken since the 1980s, and the methods
Solvents purification mainly used in pharmaceutical field such as acetone and methyl ethyl ketone (MEK) were performed through hybrid silica membranes and from binary and multi-components mixtures. Two hybrid silica membranes-zirconia doped bis(triethoxysilyl)methane and bis(triethoxysilyl)ethane
A combination of solvent extraction and freeze thaw was examined for recovering oil from the high-moisture petroleum refinery wastewater treatment pond sludge. Five solvents including cyclohexane (CHX), dichloromethane (DCM), methyl ethyl ketone (MEK), ethyl acetate (EA), and 2-propanol (2-Pro) were
The monosolvate crystal energy landscapes of dapsone (DDS) including the solvents carbon tetrachloride, acetone, cyclohexanone, dimethyl formamide, tetrahydrofuran, methyl ethyl ketone, 1,2-dichloroethane, 1,4-dioxane, dichloromethane and chloroform were established using experimental and
Inverse gas chromatography, IGC, was applied to characterize conducting polypyrrole chloride (PPyCl) using twenty three solvents. IGC is able to reveal the change in the morphology, the strength of solvent-PPyCl interactions, thermodynamics parameters (χ12, Ω1(∞)), solvent and polymer solubility
To better understand the characteristics and sources of ambient volatile organic compounds (VOCs) in a polluted area in Chengdu, which requires air pollution control, samples were collected hourly at the Shuangliu site from August 2016 to December 2016. Online gas chromatography/mass spectrometry
Experiments were conducted to test the hypothesis that aliphatic hydrocarbons bind to pockets/crevices of sodium (Na(+)) channels to cause action potential (AP) block. Aliphatic solutes exhibiting successively greater octanol/water partitition coefficients (K (ow)) were studied. Each solute blocked
Protein synthesis and lipid peroxidation were evaluated in rat liver slices incubated in the presence of oxidants and protein synthesis inhibitors. Protein synthesis by rat liver slices was evaluated by [3H]leucine incorporation into the trichloroacetic acid (TCA)-insoluble material, and lipid
This study aimed to characterize spatial/temporal variations of ambient volatile organic compounds (VOCs) using a community-scale monitoring approach and identify the main sources of concern in Paterson, NJ, an urban area with mixed sources of VOCs. VOC samples were simultaneously collected from
Biotechnology has been applied to find green and low cost environmental processes. In the waste gas treatments (odours and volatile organic compounds VOC) one of the main biological systems used is biofilters. This technology works at normal operating conditions of temperature and pressure, and
Adsorption isotherms of some volatile organic compounds (VOCs), present in air at concentrations ranging from 10 to 2500 mg m(-3), were performed onto activated carbon fiber cloth and felt. The VOCs loading air were isopropanol, toluene, acetone, methyl ethyl ketone, ethyl acetate and
OBJECTIVE
Recently, fiber-reinforced composite resin (FRC) has been introduced as a framework material for maxillofacial silicone prostheses. The purpose of this research was to study the tensile bond strength between a room temperature-polymerized maxillofacial silicone elastomer and a