resin/atrophy

Previous long-term longitudinal studies of two different methods of placing an auto-cured conventional anterior composite resin, and of a low- and a high-copper amalgam alloy, had shown similar restoration survivals despite the different resin treatment methods used or the types of amalgam alloy

Variation of the crosslinker/resin ratio of a room temperature condensation cure maxillofacial silicone elastomer has caused considerable changes in the mechanical properties and deterioration by Candida albicans. Increasing the crosslinker/resin ratio caused a decrease in the tensile strength and

Surfaces are continuously exposed to physical, chemical and biological degradation. Among the biological agents that cause deterioration, microorganisms are of critical importance. This work is part of a research programme for the characterisation of the alterations of the Milan Cathedral (Italy).

The deterioration of the mechanical properties of composite resins was examined. The bending strength and the stress relaxation rate for sixteen experimental composite resins with different filler shapes, particle sizes and filler contents immersed in distilled water for 0-60 days were measured. The

To investigate the effect of filler size on surface gloss and roughness of resin composites using a glossmeter and 3D noncontact surface topography, respectively, before and after tooth-brushing abrasion.

Seven model resin

As a strong oxidant, aqueous Cr(VI) possibly oxidizes the polymer resin and weakens resin adsorption property during Cr(VI) removal from solutions by ion exchange. In the present study, to minimize the resin oxidation, central composite design approach based on response surface methodology was

Objective of this study was to evaluate the effects of long term water storage and ageing on the bond strength of resin composite cement to yttria-stabilized zirconium dioxide (zirconia) and dialuminium trioxide (alumina). Substrate specimens of alumina and zirconia were air particle abraded with

OBJECTIVE The aim of this study was to explore methods for improving the ceramic-silane-resin bond strength of silica-based ceramics, such that it may be possible to eliminate the hazardous process of acid etching these dental ceramics with hydrofluoric acid (HF). METHODS Ni/Cr rods were prepared

OBJECTIVE The aim of the investigation was to contribute to the ongoing discussion at the international standardization committee on how to artificially age dental resin composite cements. METHODS Indirect tensile strength (n=30) of a dual-cured resin composite cement (Panavia F2.0) was measured to

OBJECTIVE To investigate how the modulus of elasticity of resin composites influences marginal quality in restorations submitted to thermocyclic and mechanical loading. METHODS Charisma, Filtek Supreme XTE and Grandio were selected as they were found to possess different moduli of elasticity but

Clusia fluminensis and C. lanceolata are dioecious shrubs having resiniferous flowers with strongly distinct androecia. The aim of this study was to investigate the development and anatomy of their androecia and the ultrastructure, histochemistry and secretory process of their androecium resin

BACKGROUND A total of 32 essential oils and resins were added individually to experimental cigarettes. OBJECTIVE A battery of tests was used to compare the toxicity of mainstream smoke from these experimental cigarettes. The lowest target inclusion level was 100 ppm and the highest was 100,000

We conducted surface characterization to assess the biocompatibility and investigate the antimicrobial activity against oral pathogens in autopolymerizing acrylic resins, coated with light-curable coating resin, containing various concentrations of Reynoutria elliptica extract (0, 200, 400,