silica/dental caries

We experimentally demonstrate a hybrid structure microlaser on chip with a single CdSe nanowire attached to a high-Q silica microdisk cavity at room temperature. When pumped by a 532 nm pulse laser, both single-longitudinal mode and multi-longitudinal mode lasers with linewidth of 0.18 nm are

The effects of thermocycling at 20,000 cycles and addition of silanized spherical silica filler (SF) on resin-modified glass ionomer cement (RMGIC) restorations were investigated. A RMGIC added with an untreated spherical silica filler (UF) was used as a comparison. Marginal gaps in Class V tooth

The influence of a near-field tip on the spectral characteristics of a resonant mode of an active photonic crystal micro-cavity was investigated. The wavelength shift of the mode was theoretically and experimentally demonstrated and evaluated as a function of the nature and the position of the tip

A Fabry-Perot (FP) cavity of simple design and based on a pure silica diaphragm-free hollow tube is proposed. Its operation is based on a first reflection of light at the end of the single-mode fiber that illuminates the silica rod and in a second reflection that takes place at the end of the rod.

Novel and uniform mesoporous silica particles with controllable cavities in their surface have been fabricated using PAA and CTAB as dual templates in a mild reaction system. Herein, a series of hierarchically distinct silica particles can be obtained by simply adjusting the mass ratios (R) of PAA

In a previous work, we proposed an improvement of the Derjaguin-Broekhoff-de Boer (DBdB) theory for capillary condensation/evaporation in open-ended cylindrical mesopores. In this paper, we report a further extension of this approach to the capillary condensation/evaporation of nitrogen in siliceous

Due to limitations of the existing preparative methods of hollow nanoparticles by either heating at high temperature (>600 degrees C) or by using strong acid, alkali, or an organic solvent, it was not possible up till now to encapsulate any sensitive organic molecule like enzyme or others inside the

We present the development of an external cavity Bragg grating stabilized laser for tunable diode laser spectroscopy (TDLS). Our design uses a planar integrated silica-on-silicon platform incorporating a custom written Bragg grating as the wavelength-selective element of the laser cavity. We have

Evanescent-wave cavity ring-down spectroscopy has been applied to a planar fused-silica surface covered with crystal violet (CV+) cations to characterize the silanol groups indirectly. A radiation-polarization dependence of the adsorption isotherm of CV+ at the CH3CN/silica interface is measured and

Photo-induced redox reactions in a hybrid film of a cationic porphyrin dye (H2TMPyP) accommodated within a transparent mesoporous silica (MPS) film spin-coated on an FTO electrode have been investigated for such applications as the construction of efficient solar energy storage devices and novel

We propose and experimentally demonstrate a microwave photonic (MWP) notch filter based on a silica microsphere cavity. By using a high-Q-factor (∼1e7) cavity with a diameter of 132 um, the filter bandwidth can be easily decreased to 15 MHz in terms of simple fabrication and flexible coupling. Then

The absorption of hemoglobin (Hb) from controlled urine samples was observed using the technique of evanescent cavity ring-down spectroscopy (e-CRDS). A room temperature, alexandrite laser pumped LiF:F2(+**) color-center pulsed laser was used to excite Hb at 425 nm. A minimum absorbance level of

Hydrogen peroxide biosensor based on the silica cavity array modified indium-doped tin oxide (ITO) electrode was constructed. An array of silica microcavities was fabricated by electrodeposition using the assembled polystyrene particles as template. Due to the resistance gradient of the silica

A polarized cavity ring-down technique was employed to precisely measure the residual stress birefringence of fused silica substrates with greatly enhanced measurement sensitivity. Intracavity birefringence resulted in beating of two orthogonally resonant modes in a Fabry-Perot cavity. The beating

Integrated optical devices comprised of multiple material systems are able to achieve unique performance characteristics, enabling applications in sensing and in telecommunications. Due to ease of fabrication, the majority of previous work has focused on polymer-dielectric or polymer-semiconductor