styrene/fatigue

The aim of this study was to investigate the effect of adding an elastomeric second phase, acrylonitrile-butadiene-styrene, on the fatigue crack propagation behavior of poly(methyl methacrylate) bone cement. Moreover, the influence of porosity and environmental conditions was studied. When comparing

Emotional instability which might be an early symptom of more severe disorders, is one of the first manifestations of chronic exposure to organic solvents. The present study measures the association between exposure to styrene and mood states of active workers. A total of 128 workers (85% of the

Forty-nine employees exposed to perchloroethylene (dry cleaning) and 41 employees exposed to styrene (fiber reinforced polyester) are compared to a control group of 68 persons. Symptoms such as dizziness, mouth dryness, fatigue, mucous membranes and skin irritation appear more frequently among the

A cross sectional study of biological markers of neurochemical function in peripheral blood cells, and self reported nervous system symptoms, was conducted among 60 workers exposed to styrene in three reinforced plastics plants and 18 reference workers not exposed to styrene or other solvents.

Workers exposed to styrene concentrations of about 50 mg/m3 at a plant manufacturing reinforced polyester boats were examined for neuropsychiatric symptoms both in close connection with exposure and also seven months after exposure had ceased. Physical workload is important for the uptake of styrene

In this paper, the fatigue response of fused filament fabrication (FFF) Acrylonitrile butadiene styrene (ABS) parts is studied. Different building parameters (layer height, nozzle diameter, infill density, and printing speed) were chosen to study their influence on the lifespan of cylindrical

In order to describe the fatigue damage state of asphalt mixture more reasonably, direct tensile tests of the fatigue and the residual strength under stress levels of 1.00 MPa, 0.50 MPa and 0.25 MPa with five parallel tests were carried out. The trabecular specimens of AC-13C asphalt mixture (25 cm

The TAXUS Express 2 Paclitaxel Eluting Coronary Stent System employs a coating consisting of the thermoplastic elastomer, poly(styrene-b-isobutylene-b-styrene; SIBS), selected for its drug-eluting characteristics, vascular compatibility, mechanical properties, and biostability. This study was

This paper investigates the structure-property relationship of a new generation of poly(styrene-b-isobutylene-b-styrene) (SIBS) block copolymers with a branched (dendritic) polyisobutylene core with poly(isobutylene-b-para-methylstyrene) end blocks (D_IBS), and their carbon black (CB) composites.

In this study, a new type of composite modified bitumen was developed by blending styrene-butadiene-styrene (SBS) and crumb rubber (CR) with a chemical method to satisfy the durability requirements of waterproofing material in the waterproofing layer of high-speed railway subgrade. A

In order to study the high and low temperature properties, and fatigue properties, of silica fume/SBS (Styrene-Butadiene-Styrene) compound modified asphalt (SFSCMA), dynamic shear rheometer (DSR) and bending beam rheometer (BBR) are used to study matrix asphalt (MA), silica fume modified asphalt

Morphology and vulcanizate properties of EPDM/SBR blends were investigated. AAHR (a mixture of aliphatic and aromatic hydrocarbon resins) was used as a compatibilizer and bis(3-triethoxysilylpropyl)tetrasulfide (TESPT) was used as a coupling agent. The vulcanizate properties and the morphological

A styrene-butadiene-styrene (SBS) latex modifier can be used for asphalt modification due to the fact of its energy-saving, construction convenience, and economic advantages. The objective of this study was to investigate the influence of asphalt type and SBS latex dosage on the rheological

Bone cement, used to fix prostheses into the bone, must be sterilized prior to implantation. Two sterilization techniques, gamma and beta radiation, were investigated, examining the influence upon molecular weight, static and dynamic mechanical characteristics and rheological properties. A number of

Surveillance of early neurotoxic alterations was undertaken in 3 reinforced plastics plants, with a view to preventive intervention. Using a longitudinal study design, exposure parameters (environmental styrene in the respiratory zone of each worker and end-shift mandelic acid (MA)) and